| Country |
Standard |
Description |
| Australia and New Zealand |
AS 4934.2-2011 - Incandescent lamps for general lighting services - Minimum Energy Performance Standards (MEPS) requirements (FOREIGN STANDARD) |
Specifies minimum energy performance standards requirements for tungsten filament lamps and tungsten halogen lamps used in general lighting services. |
| Australia and New Zealand |
AS/NZS 4783.2:2002 (R2013) - Performance of electrical lighting equipment Ballasts for fluorescent lamps Energy labelling and minimum energy performance standards requirements FOREIGN STANDARD |
Specifies classification labelling and minimum energy performance requirements for ballasts for linear fluorescent lamps for use on 230 V to 250 V a c at 50 Hz supply |
| China |
GB50189-2005 - Design Standard for Energy Efficiency of Public Buildings |
Enforced on July 1, 2005 reduce lighting and HVAC energy use of public buildings by 50% |
| China |
JGJ 75-2003 - Design standard for energy efficiency of residential buildings in hot summer warm winter zone/severe cold and cold zone |
Target a reduction in energy consumed for air conditioning and heating and lighting |
| Germany/Europe |
DIN EN 15193 "Energy performance of buildings – Energy requirements for lighting" |
DIN EN 15193 was devised to establish conventions and procedures for estimating the energy requirements of lighting in buildings and to give a methodology for a numeric indicator of energy performance of buildings. |
| India |
Energy Conservation Building Code 2007 |
Holistic building energy code with information on MEPS standards for DX equipment |
| International |
IEC/PAS 62612: Performance requirements for self-ballasted LED lamps for general lighting |
Standards for LED lighting |
| Japan |
Criteria for Clients on the Rationaliza-tion of Energy Use for Buildings (CCREUB) and Crite-ria for Clients on the Rationalization of Energy Use for Houses (CCREUH) |
Energy Codes for Commercial and Residential Buildings with guidelines for efficient HVAC systems |
| Japan |
Design and Construction Guidelines on the Rationalization of Energy Use for Houses (DCGREUH) |
Energy Codes for Residential Buildings (Houses) |
| UK |
CIBSE Commissioning Code L: Lighting |
CIBSE Commissioning Code L presents current standards of good commissioning practice in the form of recommendations and guidance. |
| UK/Europe |
BS EN 15251:2007 - Indoor environ-mental input parameters for design and assessment of energy perfor-mance of buildings addressing indoor air quality, thermal environment, light-ing and acoustics (British Standard) |
This European Standard specifies the indoor environmental parameters, which have an im-pact on the energy performance of buildings. |
| UK/Europe |
BS EN 15193:2007 Energy perfor-mance of buildings. Energy require-ments for lighting |
This European Standard specifies the calculation methodology for the evaluation of the amount of energy used for indoor lighting inside the building and provides a numeric indicator for lighting energy requirements used for certification purposes. |
| UK |
CIBSE Lighting Guide 1-13 |
Lighting guides for various purposes |
| USA |
California Energy Commission – 2008 Building Energy Efficiency Standards for Residential and Non-residential Buildings. (The new 2013 Standards will go into effect on July 1, 2014) |
Provides minimum energy performance standard for cooling and associated ventilation equipment, lighting etc. |
| USA |
ASHRAE/IESNA Standard 90.1-07 Users Manual: Energy Standard for Buildings Except Low-Rise Residential Buildings |
Provides energy efficiency measures for lighting such as controls etc. and also benchmarks for Lighting Power Density (W/m2) for different indoor and outdoor spaces/purposes. |
Buildings Guide 
Policy Guide 
Appliances Guide 
India
South Africa
